|
|
|
286
 
Group: Forum Members
Last Login: 15/11/2008 05:04:30
Posts: 472,
Visits: 12,677
|
|
| Chaps, I was running an old Maxtor IDE and could easily push my Q6600 Quad to 333 x 9 = 3ghz without any issues at all. I can now only get it up to 306 x 9 = 2.7ghz or my SATA2 drive disappears out of BIOS. Drop it down and BIOS sees it again. Any ideas? Thanks, Mitch.
____________________________________________________________________________________
Desktop
Intel Core 2 Quad Q6600 @ 3.1ghz, Asus P5KPL Motherboard, 2 x 2GB DDR2 800mhz G-Skill RAM @ 5 - 5 - 5 - 15, Asus EAH3650 Graphics Card, 250GB SATA2 Hitachi Deskstar, 120GB IDE Maxtor, 36GB SATA WD Raptor, NEC Optiarc 20x DVD-RW, 425w Hiper PSU, Xerox XA7-19i 19” LCD Monitor, Microsoft SideWinder Mouse, 1 x BT HomeHub & 1 x BT HomeHub (Repeater). Vista Home Premium x64.
Lappy
HP Compaq - NX6325 Laptop, AMD Turion 64 x2 TL-52 @ 1.6ghz, 2 x 512MB DDR2 667mhz, ATI Radeon Express 1150 Graphics, 15” LCD Screen, XP Pro SP2.
& a Nokia E61 for sofa surfing!
____________________________________________________________________________________
|
|
|
|
|
386
Group: Forum Members
Last Login: 02/11/2008 01:14:57
Posts: 627,
Visits: 736
|
|
The SATA controller is keyed into the PCI bus and FSB speeds, so when you raise the FSB the PCI clock goes up as well.
PCI is 33MHz, AGP is 66MHz, and PCI-E is 100MHz.
Pretty much all modern motherboards allow you to lock the PCI/AGP/PCI-E buses to the correct speeds, but sometimes it doesn't work after a certain speed.
I have an old 939 motherboard in my 3rd spare PC, that loses the lock and fails totally above 240FSB.
Q6600 @ 3.6GHz....4GB RAM @ 900MHz 4-4-5-12....9800GTX @ 800/2000/2400MHz....ASUS P5E
500GB Seagate 7200.11 32MB.....X-Fi Fatal1ty Pro.....Jeantech Storm 700W.....Chieftec Matrix
|
|
|
|
|
286
Group: Forum Members
Last Login: 15/11/2008 05:04:30
Posts: 472,
Visits: 12,677
|
|
Cheers Gunman, lets start ramping it up then eh!?
____________________________________________________________________________________
Desktop
Intel Core 2 Quad Q6600 @ 3.1ghz, Asus P5KPL Motherboard, 2 x 2GB DDR2 800mhz G-Skill RAM @ 5 - 5 - 5 - 15, Asus EAH3650 Graphics Card, 250GB SATA2 Hitachi Deskstar, 120GB IDE Maxtor, 36GB SATA WD Raptor, NEC Optiarc 20x DVD-RW, 425w Hiper PSU, Xerox XA7-19i 19” LCD Monitor, Microsoft SideWinder Mouse, 1 x BT HomeHub & 1 x BT HomeHub (Repeater). Vista Home Premium x64.
Lappy
HP Compaq - NX6325 Laptop, AMD Turion 64 x2 TL-52 @ 1.6ghz, 2 x 512MB DDR2 667mhz, ATI Radeon Express 1150 Graphics, 15” LCD Screen, XP Pro SP2.
& a Nokia E61 for sofa surfing!
____________________________________________________________________________________
|
|
|
|
|
286
Group: Forum Members
Last Login: 15/11/2008 05:04:30
Posts: 472,
Visits: 12,677
|
|
| Right then, I have locked the PCI-E to 100mhz but cannot find an option to lock the PCI at 33Mhz. (I assume the AGP doesn't apply) Whenever I go above 3 x 333 x 9, it won't post. I suspect voltage issues, but cannot see how to alter this in the BIOS. I have posted the settings as they stand at the moment (@3ghz) and perhaps someone with more experience would be good enough to help? Any ideas? 
____________________________________________________________________________________
Desktop
Intel Core 2 Quad Q6600 @ 3.1ghz, Asus P5KPL Motherboard, 2 x 2GB DDR2 800mhz G-Skill RAM @ 5 - 5 - 5 - 15, Asus EAH3650 Graphics Card, 250GB SATA2 Hitachi Deskstar, 120GB IDE Maxtor, 36GB SATA WD Raptor, NEC Optiarc 20x DVD-RW, 425w Hiper PSU, Xerox XA7-19i 19” LCD Monitor, Microsoft SideWinder Mouse, 1 x BT HomeHub & 1 x BT HomeHub (Repeater). Vista Home Premium x64.
Lappy
HP Compaq - NX6325 Laptop, AMD Turion 64 x2 TL-52 @ 1.6ghz, 2 x 512MB DDR2 667mhz, ATI Radeon Express 1150 Graphics, 15” LCD Screen, XP Pro SP2.
& a Nokia E61 for sofa surfing!
____________________________________________________________________________________
|
|
|
|