|
|
|
286
   
Group: Forum Members
Last Login: 01/03/2006 19:47:30
Posts: 367,
Visits: 5
|
|
|
|
|
|
Pentium
   
Group: Forum Members
Last Login: 07/03/2008 19:28:36
Posts: 1,381,
Visits: 7
|
|
Well done. Its the hercules that ive heard one has the best chance of modding. Have you tested it fully to make sure youve no artifacts(checkerboard effect). Turn on a bit of aa and af and run mark03 again to make sure.
Pete
Barton 2500XP @ 200x11=2.2Gigs
Abit NF7-s ver 2.0
9500np Softmodded to 9700
512 DDR400 Crucial ram
|
|
|
|
|
286
   
Group: Forum Members
Last Login: 01/03/2006 19:47:30
Posts: 367,
Visits: 5
|
|
yes peter ran 3do3 about 6 times the last run was at very high quality nuthing not a spec i did have it higher this is the settings i settled for i ran aquamarks3 got 41654 is this a good score
i might try this card in my msi k7n2 delta-l nfoce2 this has a 2800
barton runing at 200X10.5=2100MHz the card i have in this at the moment is a HIS ICEQ EXCALIBUR 9800PRO clocked to co
core470 mem382 3dmarks 03=6495 and aquamark3=46550
not bad i think  
K8N NEO PLATINUM AMD 64 3400+ GeGforce 6600GT/oc 1GIG TwinX 3200 2X 160GIG SAMI SATA ANTEC 480W PSU / OS XP PRO
|
|
|
|
|
286
   
Group: Forum Members
Last Login: 01/03/2006 19:47:30
Posts: 367,
Visits: 5
|
|
here lads for what it is worth i ran AIDA32 before i softmoded and it had this card running the same speed as the pro IE 378HHz the non pro 330MHz the only difference was the non pro was only running 4 pipelines pro 8pipelines 
K8N NEO PLATINUM AMD 64 3400+ GeGforce 6600GT/oc 1GIG TwinX 3200 2X 160GIG SAMI SATA ANTEC 480W PSU / OS XP PRO
|
|
|
|
|
286
   
Group: Forum Members
Last Login: 01/03/2006 19:47:30
Posts: 367,
Visits: 5
|
|
hi lads been doing a bit of testing to both cards IE AIW 9800SE+HIS 9800PRO the best i could get out of both with out any artifacts atall was hercules 9800SE CORE 414 /MEMORY 351 this gave a 3D MARK 03 OF 5512
THE HIS Iceq Excalibur 9800PRO GAVE CORE 450 /MEMORY 369 THIS GAVE 3d mark 03 = 6440 
K8N NEO PLATINUM AMD 64 3400+ GeGforce 6600GT/oc 1GIG TwinX 3200 2X 160GIG SAMI SATA ANTEC 480W PSU / OS XP PRO
|
|
|
|
|
186
   
Group: Forum Members
Last Login: 24/01/2007 18:10:22
Posts: 25,
Visits: 2
|
|
Hi all, I have the hercules aiw 9800se with softmod drivers 3.10 with no artifacts whats the best program to overclock the card or do i need hardware mod.
thanks nitrams19
Athlon64 3200 @ 2.7ghz Leadtek 6800GT @ 400/1100 2x512 Corsair 270mhz MSI Neo2 Platinium Asetek Watercooled
|
|
|
|
|
Pentium
   
Group: Forum Members
Last Login: 10/11/2004 14:09:00
Posts: 1,995,
Visits: 1
|
|
You could download some free software like powerstrip or rivatuner
|
|
|
|
|
286
   
Group: Forum Members
Last Login: 01/03/2006 19:47:30
Posts: 367,
Visits: 5
|
|
try this link http://www.rage3d.com/r3dtweak/ it works great with the 9800se where did you get your softmod driver from i canot use my remote with my one
K8N NEO PLATINUM AMD 64 3400+ GeGforce 6600GT/oc 1GIG TwinX 3200 2X 160GIG SAMI SATA ANTEC 480W PSU / OS XP PRO
|
|
|
|
|
186
   
Group: Forum Members
Last Login: 24/01/2007 18:10:22
Posts: 25,
Visits: 2
|
|
Hi thanks for the link i'll try it soon.I get my drivers from http://www.ocfaq.com/softmod/ im using 3.10 patched but i have heard that these don't work with aa enabled but not sure.
My tv works but had to use a patch from microsoft site to fix it.
Remote works with no problems but it must not be plugged in when you install drivers.Hope some of this helps had to many beers ready for some sleep.
thanks nitram
Athlon64 3200 @ 2.7ghz Leadtek 6800GT @ 400/1100 2x512 Corsair 270mhz MSI Neo2 Platinium Asetek Watercooled
|
|
|
|