abit nf7 system will not boot past verify dmi pool data

Micro Mart Forum

Home

Members

Calendar

Who's On

Welcome Guest ( Login | Register )

abit nf7 system will not boot past verify dmi...

Rate Topic

Display Mode

Topic Options

Author

Message

huzden10

Posted 30/08/2008 19:01:55

186

Group: Forum Members
Last Login: 03/09/2008 19:54:57
Posts: 12, Visits: 16

Ive just purchased a hitachi desktar t7k500 250gb ata133 8mb HDD to fit into a spare system I have laying around, no matter how i attach the drive the system refuses to boot past the verify dmi pool data part of the boot proccess.

Any ideas??

Motherboard is a NF7 abit using a xp2800 and 512mb ram in slot 0 and a fx5200.

Harddrive works fine in external caddy also ive tried the jumpers on the drive in all configurations changed the ide/power cable and used the primary and seconday connectors.

Maybe im missing something but i think the drive is faulty?

thanks for any info

huzden

Post #308247

DaveHand

Posted 03/09/2008 19:15:01

286

Group: Forum Members
Last Login: Yesterday @ 21:04:55
Posts: 449, Visits: 1,854

If the drive works in the caddy it should be ok. Getting the jumper settings correct is important. check them and check them again.

It could also be a power supply issue. Try unpluging all you other drives and have it connected on it's own.

Post #309103

huzden10

Posted 03/09/2008 19:57:26

186

Group: Forum Members
Last Login: 03/09/2008 19:54:57
Posts: 12, Visits: 16

DaveHand (03/09/2008)

Thanks for the reply i checked all the jumpers over and also elimnated the psu, good news in the end i put the drive in a caddy and found it had a partition on it I deleted it and now it works!

No idea whay tis would cause the problems i had

huzden

Post #309116

« Prev Topic | Next Topic »

Reading This Topic

Active Users: 0 (0 guests, 0 members, 0 anonymous members)

No members currently viewing this topic.

Forum Moderators: TheEditor, bobI, Jason, BJM, admin, Sarah of the Dead

Permissions

All times are GMT, Time now is 12:24am